What Is A Rodin Coil And How To Make One…

A rodin coil is a toroid with a wire schematic with the least acute angle possible. The magnetic feild is powerfully centered in it’s center. How to make a rodin coil… 1) you need to find the circumference of the toroid. This is done by finding the diameter and multiplying that by Pi on the calculator or you could substitute the button with 3.14. you can also find the cercumference by 2(pi)R. 2 times Pi times the radius. the radius is from the center to the outer edge, the diameter is from one edge(outside) to the other outer edge on the other side at an angle of 180 degrees. 2) You need to divide the cercumference into 10 degree = spacings. Do this by taking the cercumference and dividing that by 36. to mark theses distances, wrap tape(masking)around the toroid’s cercumference and mark the marks with a ruler. i would suggest using metric units because of the system of 10. 3) put a pin in each of the 36 markings. Be sure to put the pin in the center of the side. I would recommend using 3 different colors. in the video i use Red, Green, and Blue. place the pins in color sets of 3. red, green, blue. red, green blue. red, green, blue… there will be 12 sets of 3 pins. The first pin of the set will be the pin to mark the A coil, the second pin will be tto mark the B coil, and the 3rd pin will be there to mark the C coil which is open space. 4) For your first winding, glue or take the magnet wire to the outer edge of the toroid in the middle by the pin. Count 5 sets …